|
C o n s t r u c t i o n |
The photo on the left shows the rear plate with the filter element installed. It is difficult
to see in the web image, but there are two types of foam, the orange foam is coarse, the yellow
has a much finer structure, also visible is the 10mm air horn.
The photo on the right shows a rear plate with the 28mm air horn and the interior screen installed.
The front and rear plates as well as the air horns are CNC machined from 6061-t651 aluminum billet
to provide the best possible accuracy, consistency and finish.
_
_
Below is a photo of a filter with a clear upper cover installed on an air horn equipped application.
